Can You Really Make Use of Rainwater at Home? Here's What You Need to Know
Although many areas are still under drought restrictions, in the UK, we certainly aren't short of rain. But how much of it do we actually put to good use?
Most of the rain that falls on our roofs runs into gutters, down drains and eventually into rivers or the drainage system. Meanwhile, we continue using treated mains water to water our gardens, wash our cars and flush our toilets.
It seems a little wasteful when you think about it.
With growing concerns about water shortages, rising household bills and the environmental impact of water consumption, more people are looking for ways to make better use of the rain that falls on their homes.
But is rainwater harvesting really worthwhile? What can you safely use collected rainwater for? And could you ever use it for drinking?
Let's take a closer look.
1. How Much Rainwater Could You Actually Collect?
You might be surprised by how much water falls onto the average roof.
Even a relatively modest amount of rainfall can produce hundreds of litres of potentially useful water.
For example, if your home has a roof collection area of 50 square metres, just 10mm of rainfall represents 500 litres of water falling onto that area.
Not all of it will reach your storage tank, of course. Some will be lost through splashing, evaporation, overflowing gutters and other inefficiencies.
But even allowing for these losses, the potential is considerable.
Here's a simple way to calculate how much rainwater you could collect:
Rainfall (mm) × roof collection area (m²) = litres of rainwater falling on your roof.
For example:
- 5mm of rain on a 50m² roof = 250 litres
- 10mm of rain on a 50m² roof = 500 litres
- 20mm of rain on a 50m² roof = 1,000 litres
These are theoretical volumes before collection losses.
With the right storage system, even a small roof can provide a useful supply of water for everyday outdoor tasks.
2. What Can You Use Rainwater For?
The good news is that collected rainwater has plenty of practical uses around the home.
And you don't necessarily need an expensive or complicated system to get started.
Watering your garden
Perhaps the most obvious use for collected rainwater is watering plants.
Rainwater is naturally soft, making it useful for many garden plants, particularly those that prefer lower-mineral water.
A simple water butt connected to your guttering can provide a convenient supply for flowerbeds, shrubs and lawns.
If you grow fruit and vegetables, take extra care to avoid splashing untreated stored rainwater onto edible parts, especially produce eaten raw.
Washing your car
Using drinking-quality mains water to wash your car isn't always necessary.
Collected rainwater can be useful for cleaning vehicles, particularly because it contains fewer dissolved minerals than hard tap water and may leave fewer water spots.
However, stored rainwater can contain dirt and microorganisms, so it should be used sensibly and not sprayed as a fine mist.
Cleaning patios and outdoor furniture
Rainwater can be useful for washing muddy boots, cleaning garden tools, rinsing outdoor furniture and other general outdoor cleaning jobs.
These activities don't usually require drinking-quality water.
Flushing toilets
Toilet flushing accounts for a substantial proportion of household water use.
Some homes have dedicated rainwater harvesting systems that collect, filter and distribute rainwater for flushing toilets.
These are more sophisticated than a standard water butt and usually involve a storage tank, pump, pipework and suitable controls.
The rainwater system must be kept separate from the drinking-water supply, with appropriate backflow protection to prevent contamination.
Washing clothes
Some purpose-designed rainwater harvesting systems can supply washing machines.
Because rainwater is naturally soft, it may reduce the amount of detergent needed in hard-water areas.
However, rainwater used for laundry needs appropriate treatment and system maintenance to reduce contamination risks. It's not simply a case of pouring untreated water from a garden water butt into your washing machine.
3. Could Rainwater Harvesting Reduce Your Water Bills?
Potentially, yes.
If you're on a metered water supply, replacing some of your mains water consumption with collected rainwater could reduce the amount you're charged for.
The savings will depend on several factors, including:
- How much rain falls in your area
- The size of your roof
- Your storage capacity
- How much water your household uses
- Whether you have a water meter
- The cost of installing and maintaining your collection system
For most households, a simple water butt is the easiest and most affordable place to start.
Larger systems that supply toilets and washing machines can save more mains water, but the initial investment is considerably higher.
It's worth calculating the likely savings before installing a whole-house rainwater harvesting system.
4. Is Rainwater Actually Clean?
Rainwater often looks beautifully clear, particularly when collected during a fresh shower.
But clear water isn't necessarily safe water.
As rain falls through the atmosphere, it can pick up airborne pollutants.
Once it reaches your roof, it may come into contact with bird droppings, leaves, insects, dust, moss and other contaminants.
The water then travels through gutters and pipes before entering your storage container, where microorganisms may multiply if conditions allow.
Potential contaminants include:
- Bacteria, viruses and parasites
- Bird and animal droppings
- Dust and airborne pollutants
- Metals from roofing materials and fittings
- Chemicals associated with certain roof coatings or building materials
- Debris and organic matter
This is why collected rainwater should generally be treated as non-potable water unless it has undergone appropriate treatment and its safety has been verified.
Even rainwater collected from a clean-looking roof may not be suitable for drinking.
5. Can You Make Rainwater Safe to Drink?
Yes, rainwater can be treated to make it suitable for drinking, but the process depends on what contaminants are present.
There is an important difference between filtering water and purifying water.
A basic sediment filter can remove leaves, dirt and other particles, but it won't necessarily remove harmful microorganisms.
More advanced treatment methods can address different types of contamination.
For example:
- Sediment filtration removes suspended particles and debris.
- Microbiological purification can remove or inactivate harmful microorganisms, depending on the technology used.
- Activated carbon filtration can reduce certain chemicals, tastes and odours, but its effectiveness depends on the specific filter and contaminant.
- UV treatment can inactivate microorganisms when the water is sufficiently clear and the system is correctly operated.
- Reverse osmosis can reduce many dissolved contaminants, although performance varies by system and it requires appropriate maintenance.
No single treatment method is automatically suitable for every rainwater source.
If you're planning to use harvested rainwater regularly for drinking, you should have the water assessed for relevant microbiological and chemical contaminants and use a properly designed treatment system.
Regular maintenance and appropriate water testing are essential.
6. Where Does a Portable Water Purifier Fit In?
For households interested in greater water independence, a portable water purifier can be a useful piece of equipment.
LifeSaver water purifiers are designed to remove harmful microorganisms from suitable water sources, making microbiologically contaminated water safe to drink when used correctly.
Depending on the model, they can provide a convenient way to treat water collected from suitable natural sources, including rainwater where chemical contamination has been ruled out.
However, it's important to understand their limitations.
Portable microbiological purifiers should not be relied upon to remove all chemical contaminants that may be present in roof-collected rainwater.
If water has passed over roofing materials, gutters or other surfaces that may introduce metals or chemicals, additional treatment and testing may be necessary.
For households considering rainwater as a regular drinking-water source, a properly designed treatment system is the more appropriate long-term solution. Take a look at the LifeSaver C1 to see how a simple rainwater system can work.
A portable purifier can still be a valuable part of a broader approach to water self-sufficiency, provided the source is suitable and the manufacturer's instructions are followed.
7. How to Start Collecting Rainwater at Home
You don't need to install an expensive system to begin making use of rainwater.
For many households, a simple water butt is a practical first step.
Step 1: Choose a suitable collection point
Look for a downpipe connected to a roof area that receives a reasonable amount of rainfall.
Make sure the guttering is in good condition and relatively free from debris.
Step 2: Install a water butt
Choose a container designed for rainwater storage, ideally with a secure lid and a tap near the bottom.
Position it on a stable, level base.
Step 3: Fit a rainwater diverter
A diverter allows water from your downpipe to flow into the water butt.
Many systems are designed to direct excess water back into the drainage system once the container is full.
Step 4: Keep the water covered
A secure lid helps prevent leaves, insects, animals and other debris from entering the container.
It also helps discourage mosquito breeding.
Step 5: Maintain your system
Clean gutters, remove accumulated sediment and inspect your water butt regularly.
Keep stored rainwater clearly identified as non-drinking water.
Step 6: Use the water regularly
Stored rainwater is generally best used for suitable non-potable purposes rather than being left standing for long periods.
Regular use also creates space for the next rainfall.
8. What If You Don't Have a Garden?
Rainwater harvesting isn't limited to households with large gardens.
If you have a small courtyard, balcony or limited outdoor space, compact collection systems may be an option.
Slimline water butts can fit into narrow spaces, while smaller containers may be useful for collecting water for outdoor plants where collection is permitted and practical.
However, make sure any container is secure and that its weight won't exceed the load capacity of a balcony or other supporting structure. If you live in a flat, you may need permission from your landlord, freeholder or building management before making alterations to drainage systems.
Even if collecting rainwater isn't practical, you can still reduce household water consumption through simple changes such as fixing leaks, installing water-efficient fittings and using water more carefully.
9. Is Rainwater Harvesting Worth It in the UK?
For many households, absolutely.
The UK receives substantial rainfall over the course of a typical year, although the amount varies considerably between regions and seasons.
And while rainwater harvesting won't eliminate the need for a mains water supply in most homes, it can help reduce demand for treated drinking water.
It's also a useful way to become more aware of how much water we use and how valuable that resource really is.
There are environmental benefits too.
Using collected rainwater for suitable household tasks can reduce demand on public water supplies, while well-designed storage systems may help slow the flow of rainwater into drainage networks during some rainfall events.
However, a full water butt cannot capture additional runoff, so storage capacity and regular use matter.
10. Every Litre Counts
We tend to think of rain as something that simply falls from the sky and disappears down the drain. But with a little planning, it can become a valuable household resource.
You don't need to live off-grid, install an elaborate harvesting system or make dramatic lifestyle changes to benefit.
A water butt in the garden, a more efficient approach to outdoor cleaning or a dedicated rainwater system for toilet flushing can all make a difference.
The important thing is understanding which uses are appropriate for untreated rainwater and when additional treatment is necessary.
As concerns about water availability and sustainability continue to grow, making better use of rainfall is one practical step households can take.
The next time it rains, instead of watching all that water disappear down the drain, perhaps it's worth asking how much of it you could put to good use.
Explore Water Independence With LifeSaver
At LifeSaver, we believe access to safe drinking water shouldn't always depend on conventional infrastructure.
Our range of portable water purifiers is designed to help individuals, families and outdoor adventurers access microbiologically safe drinking water from suitable sources.
Whether you're exploring off-grid living, preparing for outdoor adventures or simply looking for greater flexibility in how you access drinking water, discover the LifeSaver range and learn more about portable water purification.
More reading:
https://iconlifesaver.com/blogs/news/how-are-we-still-in-drought-conditions
https://iconlifesaver.com/blogs/news/reclaim-the-rain-rainwater-harvesting-emergency-water-preparedness